[aprilla]

MusicSheets is communicating with the 720, and visa versa. The registrations and sheets are working both ways. Nice. 

I want my M-Audio SP-2 (as pedal 2) to turn pages in MS but it isn't and I can't figure how to set it up. (I use my pedal #1 to change Registration Sequence)

I've been in the MS settings and under Pedal > Pedal 2, nothing happens when I clear and try to 'map the action'. This is all I've attempted to do. I'm testing with a sheet that has 6 pages, so there is turning to do. I've searched here and read some posts, but nothing there has helped me yet.

Probably I need to changer something on my keyboard. I've swapped the pedals and both pedals work, but my other pedal (FC-7) as pedal #2 doesn't change pages either so it should be something to do with Midi or with Pedal 2 settings.... maybe? I don't know what to change.

Sorry to be a pest, it's not urgent, but I'm stuck!

[aprilla]

When I open a piece in MS and go to its MIDI tab, pressing the #2 pedal shows me options, one includes F0 43 7E 00 18 00 F7. All that tells me is that MS did receive a message from my pedal, it hasn't really helped, but gives me hope. 

I've reset MS back to defaults.

[Zubersoft]

A pedal like that does not act as an HID so it can't be used with Settings->Touch & Pedal Settings->Pedal Actions (which just makes key commands to actions). Instead, you have to establish a MIDI connection with the device the pedal is connected to (it sounds like you've already done this), then go to Settings->MIDI Settings->MIDI Actions, tap the + icon, select the action, then tap the MIDI listen dialog on the right side of the dialog. This will bring up the MIDI listen dialog, and you should then press the pedal. Hopefully you receive a simple MIDI command like a control change that you can trigger on. If you can capture the MIDI messages, I can help you make sense of them.

Another user detailed how set up their MIDI actions with their Roland FP-30X here: https://www.zubersoft.com/mobilesheets/f...-9439.html

You will be taking a similar approach most likely, but it all depends on what MIDI messages are transmitted from the 720 (does this refer to the Yamaha PSR-SX720?).

Mike

[aprilla]

PSR SX720, yes.

I'll follow the suggestions you've given me and see how it goes. Thank you,

In case I can't manage it, does the Joyo JSP-01 Page Turner Pedal work with MobileSheets?
https://www.thomann.de/ie/joyo_jsp_01_pa..._pedal.htm

[Zubersoft]

Yes, it looks like that pedal functions like most bluetooth pedals in that it sends keyboard commands like page up/page down. You would configure that under Settings->Touch & Pedal Settings->Pedal Actions.

Mike

[aprilla]

In MIDI Actions I get two responses

Control Change - 11 (Number), 0 (Value), Channel 1

Control Change - 11 (Number), 127 (Value), Channel 1


I've read the other post but not tried anything in case I'd do something that would mess up your trying to help.

[aprilla]

I've ordered the bluetooth page turner, not to waste your time and also because I'll get the forward and backward function. I hadn't realised such a useful tool existed.
I got the  LEKATO JSP-01 as the other I was looking at wasn't in stock.

Thank you for trying to help, I hope once the turner arrives I'll be nicely set up, it's a very nice program.

Mary