[dnuttall]

Thoughts:

Have you used the "Sync to PC" on the tablet? (press the three dots at right of top menu bar)

In the Companion, if it doesn't now show the connect screen, try a manual connect (type the IP address shown on the tablet screen)

If that doesn't work, open a Cmd box on the PC and ping the address shown on the tablet (it must still be in "sync to pc" mode) e.g. ping 192.168.1.230 (you probably have different last 3 digits); if the ping doesn't detect the tablet then you have a network issue (nothing to do with MSP) and you will need to fix that before you can use MSP (the tablet needs to be "known" to your router)

Geoff

Somewhat brain-dead here, Geoff!
When I run MSP companion on a separate PC and then Sync to PC on the tablet PC, it works fine!

I was trying to run the companion on the same PC as the tablet!
THANKS.