05-30-2022, 04:26 AM
I am not very familiar with Bome's Midi Translator Classic, and I don't know whether it is creating virtual MIDI ports or if it's designed only to connect to MIDI accessories, but I would strongly advise trying to remove that from the equation until you've got things working with a more simplified connection. Bome may connect to the MIDI device and then prevent MobileSheets from connecting to it, unless you are connecting MobileSheets to Bome and it is using virtual MIDI ports to allow MIDI messages to flow through it. You haven't provided all the details, so I'm going to make the following assumptions:
1) You are running MobileSheets on a Windows device
2) You are connecting to your MIDI devices over USB
3) You have a Focusrite device between your Windows device and the keyboard
4) You have the MIDI keyboard set up to listen on either MIDI channel 1 or all MIDI channels
5) You have MobileSheets configured to not use multiple MIDI channels and it set to MIDI channel 1.
In that case, please do the following:
1) Go to Settings->MIDI Settings->Select MIDI Devices
2) Tap the input and output ports for 2-Focusrite USB Midi. You should see "Connected" listed after the name if the connection is successful
3) Go to the library screen, go to the Songs tab, tap "New" go to the MIDI tab, tap the + icon, and then set up a MIDI command that you know the keyboard will respond to. I would advise sending a Program Change message with a value of 2. This should switch to the 2nd instrument in the current bank on the keyboard.
4) Tap the Test MIDI Command button. The instrument should change on the keyboard if you used a program change message
Let me know if you are not able to get that working.
Mike
1) You are running MobileSheets on a Windows device
2) You are connecting to your MIDI devices over USB
3) You have a Focusrite device between your Windows device and the keyboard
4) You have the MIDI keyboard set up to listen on either MIDI channel 1 or all MIDI channels
5) You have MobileSheets configured to not use multiple MIDI channels and it set to MIDI channel 1.
In that case, please do the following:
1) Go to Settings->MIDI Settings->Select MIDI Devices
2) Tap the input and output ports for 2-Focusrite USB Midi. You should see "Connected" listed after the name if the connection is successful
3) Go to the library screen, go to the Songs tab, tap "New" go to the MIDI tab, tap the + icon, and then set up a MIDI command that you know the keyboard will respond to. I would advise sending a Program Change message with a value of 2. This should switch to the 2nd instrument in the current bank on the keyboard.
4) Tap the Test MIDI Command button. The instrument should change on the keyboard if you used a program change message
Let me know if you are not able to get that working.
Mike