06-27-2022, 06:01 AM
I send MIDI commands to my Kurzweil PC4 on song load, but it's not completely reliable. The pattern is that it works for a while, but eventually it stops working and the only way to get it working that I've found is to restart the tablet.
The tablet is a Samsung Galaxy Tab S8 with Android version 12. MobileSheets is v3.5.8.
It's configured to use "Google" as the MIDI library. Behavior is similar with the "High-Performance" library.
The tablet's connected directly to the PC4 with a USB cable. I've tried a second cable.
Previously I used an older tablet (an S3) for the same purpose, and it's worked OK for that
I also had some trouble with my previous tablet (an S3), that eventually went away with my understanding the problem. (And Michael Zuber tried to help me debug that (much appreciated!) but we didn't reach any conclusion.) That's worked OK for the last year or so.
Any suggestions on workarounds or where to look for the problem are welcomed.
The tablet is a Samsung Galaxy Tab S8 with Android version 12. MobileSheets is v3.5.8.
It's configured to use "Google" as the MIDI library. Behavior is similar with the "High-Performance" library.
The tablet's connected directly to the PC4 with a USB cable. I've tried a second cable.
Previously I used an older tablet (an S3) for the same purpose, and it's worked OK for that
I also had some trouble with my previous tablet (an S3), that eventually went away with my understanding the problem. (And Michael Zuber tried to help me debug that (much appreciated!) but we didn't reach any conclusion.) That's worked OK for the last year or so.
Any suggestions on workarounds or where to look for the problem are welcomed.