Tim,
I would advise holding the power button on the pedal for eight seconds until you see the lights blink three times. That clears the pairing. Next, go into the tablet bluetooth settings and clear the pairing for the pedal and forget it. Next, with the pedal blinking in mode 1, meaning it wants to pair/connect, go to the AirTurn Direct Mode in MobileSheets, try to connect and see if it succeeds. Hopefully then it will connect as you would expect and you can set up the pedal actions as needed under Settings->Touch & Pedal Settings->Pedal Actions. You'll want to tap the keys field for pedal 1, then tap Clear on the dialog, then press the pedal switch and something should show up if it is working.
Alternatively, switch the pedal to mode 3, hold the power button for eight seconds until you see the lights blink 3 times, clear the pairing in the bluetooth settings, then turn the pedal on and pair it with the tablet. You can then set up the pedal actions in MobileSheets
Mike
I would advise holding the power button on the pedal for eight seconds until you see the lights blink three times. That clears the pairing. Next, go into the tablet bluetooth settings and clear the pairing for the pedal and forget it. Next, with the pedal blinking in mode 1, meaning it wants to pair/connect, go to the AirTurn Direct Mode in MobileSheets, try to connect and see if it succeeds. Hopefully then it will connect as you would expect and you can set up the pedal actions as needed under Settings->Touch & Pedal Settings->Pedal Actions. You'll want to tap the keys field for pedal 1, then tap Clear on the dialog, then press the pedal switch and something should show up if it is working.
Alternatively, switch the pedal to mode 3, hold the power button for eight seconds until you see the lights blink 3 times, clear the pairing in the bluetooth settings, then turn the pedal on and pair it with the tablet. You can then set up the pedal actions in MobileSheets
Mike