• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
TC Helicon VoiceLive 3x
A user had discovered how to get the MIDI working with his TC Helicon VoiceLive 3x, so I just wanted to share the information here in case it would be useful to anyone:

First, I added a USB C to 9-Pin in/out MIDI cable. I believe USB C to Mini USB on the VL3X would also work. Once the cable was connected I could see MIDI messages flowing to the pedal. All 3 MIDI configurations work, but I'm staying with Google for the added flexibility.
To change presets, a Patch Select message must be sent. I'm sending on load. I think it could also be triggered in a smart button.
The format for the patch message is MSB=0; LSB=0-3; Value/patch=0-127. Presets 0-127 are in bank 0, 128-256 are in bank 1, and so on.
To trigger a change to preset 256, the MIDI message is patch select; 0; 1; 127. Preset 257 is patch select; 0; 2; 0. I'm including these details because the VL3X has 500 presets. So, the patch change has to be "calculated" as the bank and the sequential preset number for that bank.

Users browsing this thread:
1 Guest(s)

  Theme © 2014 iAndrew  
Powered By MyBB, © 2002-2024 MyBB Group.